User talk:KidFlash4555

How to make a stun-gun out of a disposable camera

Making a taser is a fun process, and is very simple, despite what many think. The taser in this case will work exactly the same as a stun-gun - two wires will emit an electrical impulse that will be painful and shock the victim.

Tools needed:

1 disposable camera

1 soldering gun

2 16-gauge wires

Phillips screwdriver The camera must be disposable. Some normal cameras will work, but disposable are cheap and guaranteed to have the correct parts.

Step 1: remove the card board body by either tearing it or cutting it off with a knife.

Step 2: Carefully take apart the plastic body using the screwdriver (should be Phillips head, some may be straight). Be sure that the batteries are taken out of the camera so that you don't accidentally shock yourself.

Step 3: Once the plastic body is removed, you should see the circuit board. Remove it from the plastic body. Be careful that you don't break any wires or crack the circuit board.

Step 4: Locate the flash. There will be two connectors that connects the flash-these are the wires we are going to use. Take the 16-gauge wire and cut it into two pieces approx. 6 inches in length.

Step 5: Take the two wires and carefully solder them to the connectors. Remove the flash bulb.

Step 6: Place the circuit board back into plastic body. Leave the wires out of the case. Trim the wires so that they are about 3 inches long and tape the ends so the wires are laying flush on the plastic body.

Step 7: To use the taser, simply touch the wires to the persons body and press the button to snap a picture. If you want the stun to be more powerful, charge the flash fully before zapping.

This camera will be a full working taser. It is a weapon, and should be treated as such. Do not use on anybody. It will shock them, and can be quite painful.*Note: this is for informative purposes only. Neither the writer nor the publish condones use of the tutorial in any illegal fashion. This is a dangerous object and can be lethal. Use at your own risk. By using this tutorial, you certify that you have read this disclaimer and agree to/understand it in full.

Speedy deletion nomination of How to make a stun-gun out of a disposable camera

Hello KidFlash4555,

I wanted to let you know that I just tagged How to make a stun-gun out of a disposable camera for deletion, because it seems to be vandalism or a hoax.

If you feel that the article shouldn't be deleted and want more time to work on it, you can contest this deletion, but please don't remove the speedy deletion tag from the top.

You can leave a note on my talk page if you have questions. Reedman72 (talk) 21:00, 20 February 2014 (UTC)